• ST-120 Iron Roughneck

    The new ST-120 Iron Roughneck from National Oilwell Varco combines compact design with maximized reach and takes it to an unprecedented level.

    >
    Description

    • Compact Design: The new ST-120 Iron Roughneck from National Oilwell Varco combines a compact design with maximized reach and takes it to an unprecedented level. Completely retractable, the tool extends just over 5 feet from the pivot, minimizing its footprint and leaving more room on the rig floor. Fully extended, the tool travels a full 12 feet allowing versatile layout configurations. With its trackless design, the new ST-120 continues to improve drill floor safety.
    • Innovation:  The innovative torque wrench design has a full 60 degrees of rotation and three-point bite which means better grip, quicker make-up and less box deformation on the connection by applying more accurate make-up torque. Combined with a high-torque spinning wrench design the ST-120 is equipped to handle today's high-performance drill pipe connections.
    • Ease of Installation:  With small spaces in mind, the compact size of the ST-120 means replacement of your existing iron roughneck is easy. Even tough roughneck installations under the blocks are no problem as the maximum vertical height of the frame is less than 120 inches. Manual control is carried forward from the ST-80 with an option for fully automated controls from either the driller's control console or a handheld wireless remote control. For the best in iron roughneck technology and value, look no further than the leader in iron roughnecks, National Oilwell Varco.

    Specifications

     

    Specifications 

    Weight: ST-120 Assembly 

    19,800 lbs (8981 kg) (installed weight) 

    Hydraulic Requirements 

     2,500 psi (172 bar) to 3,000 psi (207 bar)
    45 GPM (170 LPM) Min; 65 GPM (245 LPM) Max  

    Tubular Range 

    3-7/8" to 10" OD (88.9 mm to 254 mm) 

    Spin Speed 

    80 RPM (nominal on 5" OD) 

    Spin Torque 

    3,000 Ib-ft (4,067 Nm) 

    Maximum Make-Up Torque 

    100,000 lb-ft (135,600 Nm) 

    Maximum Break-Out Torque 

    120,000 lb-ft (162,700 N-m) 

    Connection Height 

    33.10" to 75.10" (841 mm to 1,908 mm) 

    Horizontal Travel 

    12 ft (3.66 m) 

    TW Vertical Travel 

    42" (1 ,067 mm) 

    SW Vertical Travel 

    42" (1 ,067 mm) 

    System Control 

    Hydraulic-Over-Hydraulic; optional Electric-Over-Hydraulic (Remote-Auto) 

    Operator Controls 

    Locally-Mounted to Tool; optional Remote-Auto 

    Optional Features 

    Bit Breaking, Automatic Remote Control from Driller's Cabin, Wireless Remote Control, Casing Module/Hanger